AxLR Black Barbell 2.0 - 20 kg
The all- purpose barbell
The AxLR black barbell 2.0 was designed for your WODs and repeated Weightlifting exercises.
You will increase your rep 'thanks to its 4 needles bearings system. The grip of the AxLR men's Bar has been worked for the intense repetition of movements, it will hang without damaging.
The Black cerakote finish gives a stylish look, and provides extreme protection against corrosion.
A silicone strap has been added to protect the bar when it placed on the floor without weights.
AxLR Barbell Black 2.0 Characteristics:
- Weight: 20kg
- Diameter: 28 mm
- Sleeve diameter: 50 mm
- Tensile Strenght: 190,000 PSI
- Total length: 200 cm
- Shaft Lenght: 131 cm
- Sleeves length: 41,50 cm
- Max load: 700 kg
- Bushings/Bearings: 4 needles Bearings
- Dual Knurl Marks, No Center Knurl
- Shaft Coating: Black Cerakote
- Sleeve Coating: Hard chrome
Hurry up! Only 2 item(s) left in Stock!
Must-have Accessories
Bumpers
Collars
Accessories
 Ultimate Fractional Plates!
Fractional Plate Features:
| Fractional Plate - Unit €15.50 | |
Increase your PR's with the change platesThe Change Plates is made of dense resin and high-end products, these additional weights minimize noise when the bar is dropped. Their Collar opening meets IWF standards of 50.1 mm. You will be able to adapt your weight with great precision to respect your loads and work efficiently. Friction Grip Change Plates are essential for all boxers and all athletes who practice often weightlifting. Change Plates Features :
| Change Plate - Unit €12.50 | |
  Fractional Plates SetLooking for your "Personal Record"? Use these Fractional Plates to gradually load your weightlifting bar. Gradually increase your load, take the good sensations barbell in hand and progress quickly thanks to our fractional set. | Fractional Plates - set 5 kg €69.00 | |
  Technical Weightlifting Bumper Plate!The 2.5kg CrossLiftor Olympic technical plates benefit from a long know-how in the design of weightlifting equipment. These initiation weights are ultra strong and can be thrown to infinity on the ground. Athletes and weightlifters will finally be able to work on bars with lighter loads, at the same height and under the same conditions as with conventional weightlifting discs. Technical bumper features :
| Technical Bumper Plate 2,5 kg - Unit €69.00 | |
  The brush for your weightlifting bars!The barbell brush 360° by CrossLiftor is a brush specially designed for brushing your weightlifting bars. Its flexible shape allows the barbell brush to hug the bar perfectly, brushing all around the bar in a single stroke! Proper care of your weightlifting bar is important to keep it in good condition for a long time to come. Barbell Brush features:
| Barbell Brush 360° €16.00 | |
  Droppable Initiation Plate 2.5 kg !The Droppable Initiation Plate 2.5 kg by CrossLiftor benefit from a long know-how in the design of weightlifting equipment. These olympic initiation weights are ultra strong and can be thrown to infinity on the ground. Athletes and weightlifters will finally be able to work on bars with lighter loads, at the same height and under the same conditions as with conventional weightlifting discs. Warning : Initiation Plate features :
| Droppable Initiation Plate 2.5 kg - Unit €44.00 |
Floor
Storage
  Keep your weightlifting bar safe and tidy!The Tank bar holder lets you store your weightlifting bar vertically along your Tank and/or Rust cage post. Discreet, the Tank bar holder doesn't take up any space. What's more, the plastic cover on the top of the support will protect your bar when you store it on the support. Features of the Tank bar holder:
ATTENTION: this product is compatible with our Tank and/or Rust Crossliftor cages only, and not with other squat racks, our folding cage or cages from other brands. | Tank Barbel Hanger €23.50 | |
  Keep your weightlifting bars safe and tidy!The Wallmount 2-barbells hanger lets you store 2 Olympic bars vertically on the wall. It will keep your training space tidy and your weightlifting bars safe. The Wallmount 2-barbells hanger takes up very little space and gives you comfort and security. Features of the Wallmount 2-barbells hanger:
| Wallmount 2 barbells hanger €25.00 | |
  Keep your weightlifting bars safe and tidy!The Wallmount 6-barbells hanger lets you store 6 Olympic bars vertically on the wall. It will keep your training space tidy and your weightlifting bars safe. The Wallmount 6-barbells hanger takes up very little space and gives you comfort and security. What's more, the plastic cover on the top of the support will protect your bar when you store it on the support. Features of the Wallmount 6-barbells hanger:
| Wallmount 6 barbells hanger €98.00 | |
Wall rack for 8-BarbellsWall-mounted storage rack for up to 8 weightlifting bars. Made of resistant steel and with a plastic coating to protect your bars, this rack will efficiently improve your storage space. Height: 140cm Note: storing weightlifting bars horizontally protects the bearings and improves their longevity. | Wall rack for 8-Barbells €109.00 | |
Barbells Storage!
The bottom of the cubic storage has a metal plate thus preventing the bars from touching the ground. Characteristics :
| Cubic storage for 9 Barbells €149.00 | |
  The ideal rack for your bumper plates!The Mobile storage bumpers and barbells is the ideal storage rack for your weightlifting plates and bars! Compact, you will save space and keep a clean and tidy workout area. Thanks to this bumper plates storage rack you will bring to your members a real comfort of training. The technical features of this storage rack make it an indispensable piece of equipment for all box owners and gym owners.
| Mobile storage bumpers and barbells €279.00 | |
  Studio Rack very complete!The Studio Storage by CrossLiftor is designed to put the essentials of your equipment in a small space. Its 4 shelves allow you to store kettlebells, dumbbells, Wall Balls, or weightlifting discs, you can place all these items at your convenience. It also has 2 slots for Olympic weightlifting bars at each end. The thickness and sturdiness of the steel of the Studio Storage will guarantee you stability and reliable security. Characteristics :
| Studio Storage Rack €399.00 |
CrossLiftor Olympic Bar High Intensity
Inspired by current design and technicality trends, CrossLiftor wanted to create the AxLR bar. With a 190,000 PSI tensile strength and selected needle bearings Made in Germany with high quality, the AxLR Olympic Bar will give you an increased performance during your training and a long life even with intensive practice.
The AxLR CrossLiftor barbell is produced using high precision machines and demanding specifications, giving the result a high-end weight bar with worked finishes: 4-needle bearings on each sleeve to quickly lock your movements, strong grip without damaged hands, hard chrome treatment to avoid rust spots, silicone strap to protect the bar placed on the ground.
AxLR Black Barbell 2.0 Characteristics
- Brand: CrossLiftor
- Bar Type: men's bar
- Using the bar: weightlifting, powerlifting etc.
- Weight: 20 kg
- Diameter: 28 mm
- Sleeve diameter: 50 mm
- Shaft Coating: Black cerakote
- Sleeve Coating: hard chrome
- Total length: 220 cm
- Shaft Lenght: 131 cm
- Sleeves Length: 31,50 cm
- Center knurl: no
- Knurl mark: dual
- Bushings/Bearings: 4 needles Bearings
- Tensile strength: 190,000 PS
- Max load: 700 kg
- Use: high intensity
- Quality tested and certified by CrossLiftor
Maintenance and storage of your weightlifting barbell:
- We recommend storing your Olympic bars horizontally, and cleaning them regularly to remove magnesia and perspiration, using a damp cloth without detergent, or a soft bristle brush (Barbell Brush) for colored bars, or a hard bristle brush for other bars. If you have used water, dry the bars thoroughly before storing them.
- For colored bars, be careful not to wash or brush the bars several times a day, or the color will fade prematurely! The thermal and ceramic finishes we apply to our bars protect them sufficiently. Brushing once a week for private customers, or once a day for professionals, is more than enough.
- For optimum performance, we recommend that you do not dismantle or grease the bearings. However, after several years, you may wish to lubricate the bearings of your Olympic bar using a Teflon-type lubricant or one specialized for Olympic bar maintenance. This lubricant will prevent the bar needles from clogging.
- On the other hand, you must never dismantle the bearings, as this can damage them and alter their operation if they are incorrectly reassembled.
Shipping Information
The product is in stock: shipping within 24 to 72 hours.
The product is out of stock : The availability date is displayed under the Pre-order button.
For orders with one or more out-of-stock products and over 500€: shipment of in-stock products within 24 to 72 hours. A second shipment will take place at no extra shipping cost as soon as ALL other out-of-stock products in pre-order are restocked.
For orders with one or more out-of-stock products and under 500€: we will only make one shipment as soon as ALL out-of-stock products are in pre-order. If you want a first shipment of the products in stock, you will have to place 2 orders, one with the products in stock, and another one with the products in pre-order.
All the dates of restocking of out-of-stock products are indicated and updated daily on the product pages on our website and archived in your order history.
After the shipping day, you can add between 1 and 5 days for the goods transit
We offer several delivery methods depending on the weight of the order and the volume of the parcels. There are many different options, so you can check the delivery method(s) once you are in your basket and have selected your carrier. All the carriers we work with require your signature upon delivery of your order.
Regardless of the carrier, you will be notified before the delivery date. For small parcels, you will receive an email and/or text message with the delivery date, which you can change as you wish. For pallets, the carrier will call you to arrange an appointment and a time slot.
We also offer Click & Collect for those who do not wish to pay shipping costs and can come to our premises in Rognac (13340). Once you have selected your delivery method, simply select ‘Click & Collect’ and choose a date and time slot for collection.
Whatever the carrier, you are notified before the day of delivery. For small parcels, you receive an email and/or text message with the delivery day, which you can modify as you wish.
If you are absent at the time of the delivery, the transporter can let the parcel in a point relay if this one measures less than 120cm height and weighs less than 30 kg. Otherwise, you will be notified to agree a second appointment within 48 hours, without news from you, the parcel will be returned to Crossliftor. You will have to pay the shipping costs again to have the parcel delivered.
For larger parcels and pallets deliveries, the transporter will call you to agree on an appointment and a time slot. If you are absent on the delivery day, you will have to pay the representation fee again, otherwise the order will be resent to Crossliftor.
If you leave in France, nothing could be simpler, once your cart and your account are created, you will be able to choose Click & Collect in the shipping methods. You will just have to enter the day and time of your choice!
We have only one collection point for the moment, in the Crossliftor warehouses in Rognac (13340 - FRANCE) The Click & Collect is open from Monday to Friday included. The schedule will depend on the available slots.
