DtR Barbell- 20 kg
€249.17 249.17HT
The High- End Olympic Barbell
The Olympic bar DtR 20kg is designed for the most demanding athletes. 6 high quality needle bearings, soft and resistant steel, zinc plated treatment and protective silicone strap... the most advanced for Crossliftor!
The solidity and flexibility of the steel allows a long life, while dropping ("dropping") the bar repeatedly. Its 6-needle bearings made in Germany improve the fluidity and speed of the movements with an incomparable feeling.
Be determined to blow up your Personal Records with the "DtR" barbell!
Characteristics:
- Weight : 20 kg
- Bar diameter: 28 mm
- Handle diameter: 50 mm
- Resistance: 190,000 PSI
- Total length: 220 cm
- Length bar between the handles: 131 cm
- Handle length: 41.50 cm
- Maximum load: 1000 kg
- Bearings: 6 needles on each handle
- Double marking and without central marking
- Treatment: zinc plated
Must-have Accessories
Bumpers
Collars
Accessoires
 Ultimate Fractionnal Plates!
Features:
| Fractional Plate - Pair €27.50 | |
Increase your PR's with the change platesThe Change Plates is made of dense resin and high-end products, these additional weights minimize noise when the bar is dropped. Their Collar opening meets IWF standards of 50.1 mm. You will be able to adapt your weight with great precision to respect your loads and work efficiently. Friction Grip Change Plates are essential for all boxers and all athletes who practice often weightlifting.
| Change Plate - Pair €20.83 | |
  Fractional Plates SetLooking for your "Personal Record"? Use these Fractional Plates to gradually load your weightlifting bar. Gradually increase your load, take the good sensations barbell in hand and progress quickly thanks to our fractional set. | Fractional Plates - set 5 kg €57.50 | |
  Technical Weightlifting Bumper Plate!The 2.5kg CrossLiftor Olympic technical plates benefit from a long know-how in the design of weightlifting equipment. These initiation weights are ultra strong and can be thrown to infinity on the ground. Athletes and weightlifters will finally be able to work on bars with lighter loads, at the same height and under the same conditions as with conventional weightlifting discs. Technical bumper features :
| Technical Bumper Plate 2,5 kg €57.50 |
Sol
Rangement
Wall rack for 8-BarbellsWall-mounted storage rack for up to 8 weightlifting bars. Made of resistant steel and with a plastic coating to protect your bars, this rack will efficiently improve your storage space. Height: 140cm Note: storing weightlifting bars horizontally protects the bearings and improves their longevity. | Wall rack for 8-Barbells €90.83 | |
Barbells Storage!
The bottom of the cubic storage has a metal plate thus preventing the bars from touching the ground. Characteristics :
| Cubic storage for 9 Barbells €124.17 | |
The ideal rack for your bumper plates!This storage rack for your disks is great for saving space and keeping a clean wod area. Thanks to this bumper plates storage rack you will bring to your members a real comfort of training. The technical features of this storage rack make it an indispensable piece of equipment for all box owners and gym owners. | Horizontal Bumpers rack €245.83 | |
  Studio Rack very complete!The Studio Storage by CrossLiftor is designed to put the essentials of your equipment in a small space. Its 4 shelves allow you to store kettlebells, dumbbells, Wall Balls, or weightlifting discs, you can place all these items at your convenience. It also has 2 slots for Olympic weightlifting bars at each end. The thickness and sturdiness of the steel of the Studio Storage will guarantee you stability and reliable security. Characteristics :
| Studio Storage Rack €404.17 |
Description of the Olympic bar DtR :
- Brand : CrossLiftor
- Type of the bar : man
- Use of the bar: weightlifting, weightlifting, powerlifting
- Weight of the bar: 20 kg
- Bar diameter: 28 mm
- Handle diameter: 50 mm
- Color : Steel
- Finish: Bright Zinc
- Total length: 220 cm
- Length of the bar between the handles: 131 cm
- Handle length: 41.50 cm
- knurl center: no
- Knurl mark : double
- Bar steel: alloy
- Bearing: 6 needles
- Tensile strength: 190,000 PSI
- Maximum load: 1000 kg
- Use: very high intensity
Maintenance and use:
For optimal performance, it is recommended to lubricate the bearings of your DtR barbell every 6 months. Use a Teflon type lubricant or a specialized lubricant for the maintenance of Olympic bars. This lubricant will not clog the ring of your bar.
It is recommended to store your Olympic bars horizontally, in a dry and dry place, and to clean them after each training session. Removing chalk and perspiration will prevent rust spots from appearing.
Shipping Information
The product is in stock: shipping within 24 to 72 hours.
The product is out of stock : The availability date is displayed under the Pre-order button.
For orders with one or more out-of-stock products and over 500€: shipment of in-stock products within 24 to 72 hours. A second shipment will take place at no extra shipping cost as soon as ALL other out-of-stock products in pre-order are restocked.
For orders with one or more out-of-stock products and under 500€: we will only make one shipment as soon as ALL out-of-stock products are in pre-order. If you want a first shipment of the products in stock, you will have to place 2 orders, one with the products in stock, and another one with the products in pre-order.
All the dates of restocking of out-of-stock products are indicated and updated daily on the product pages on our website and archived in your order history.
After the shipping day, you can add between 1 and 5 days for the goods transit
We offer several delivery solutions depending on the weight of the order and the volume of the parcels. There are many cases, you will be able to consult the delivery method(s) once the products are added to your shopping cart. All the transporters with whom we work deliver your order upon your signature.
Whatever the transporter, you are informed before the day of delivery. For small parcels, you receive an email and/or text message with the day of delivery, which you can modify as you wish. For pallets, the transporter calls you agree on an appointment and a time slot.
We also offer Click & Collect solution for those who do not want to pay shipping costs and move to us in Vitrolles, FRANCE (13127). Once in the delivery solutions, you will just have to select "Click & Collect" and to choose a date and a time slot of withdrawal.
Whatever the carrier, you are notified before the day of delivery. For small parcels, you receive an email and/or text message with the delivery day, which you can modify as you wish.
If you are absent at the time of the delivery, the transporter can let the parcel in a point relay if this one measures less than 120cm height and weighs less than 30 kg. Otherwise, you will be notified to agree a second appointment within 48 hours, without news from you, the parcel will be returned to Crossliftor. You will have to pay the shipping costs again to have the parcel delivered.
For larger parcels and pallets deliveries, the transporter will call you to agree on an appointment and a time slot. If you are absent on the delivery day, you will have to pay the representation fee again, otherwise the order will be resent to Crossliftor.
If you leave in France, nothing could be simpler, once your cart and your account are created, you will be able to choose Click & Collect in the shipping methods. You will just have to enter the day and time of your choice!
We have only one collection point for the moment, in the Crossliftor warehouses in Rognac (13340 - FRANCE) The Click & Collect is open from Monday to Friday included. The schedule will depend on the available slots.
