CrossLiftor Olympic Barbell Blood High Intensity
Inspired by current design and technicality trends, CrossLiftor wanted to create the AxLR bar. With a 190,000 PSI tensile strength and selected needle bearings made with high quality, the AxLR Olympic Bar will give you an increased performance during your training and a long life even with intensive practice.
The AxLR CrossLiftor barbell is produced using high precision machines and demanding specifications, giving the result a high-end weight bar with worked finishes: 4-needle bearings to quickly lock your movements, strong grip without damaged hands, hard chrome treatment to avoid rust spots, silicone strap to protect the bar placed on the ground.
AxLR Blood Barbell 2.0 Characteristics:
- Brand: CrossLiftor
- Bar Type: men's bar
- Using the bar: weightlifting, powerlifting etc.
- Weight: 20 kg
- Diameter: 28 mm
- Sleeve diameter: 50 mm
- Shaft Coating: Red Cerakote
- Sleeve Coating: Hard chrome
- Total length: 200 cm
- Shaft Lenght: 131 cm
- Sleeves Length: 31,50 cm
- Center knurl: no
- Knurl mark: dual
- Bushings/Bearings: 4 needles Bearings
- Tensile strength: 190,000 PSI
- Maximum load: 700 kg
- Use: high intensity
- Quality tested and certified by CrossLiftor Team
Maintenance and storage of your weightlifting barbell:
- We recommend storing your Olympic bars horizontally, and cleaning them regularly to remove magnesia and perspiration, using a damp cloth without detergent, or a soft bristle brush (barbell Brush) for colored bars, or a hard bristle brush for other bars. If you have used water, dry the bars thoroughly before storing them.
- For colored bars, be careful not to wash or brush the bars several times a day, or the color will fade prematurely! The thermal and ceramic finishes we apply to our bars protect them sufficiently. Brushing once a week for private customers, or once a day for professionals, is more than enough.
- For optimum performance, we recommend that you do not dismantle or grease the bearings. However, after several years, you may wish to lubricate the bearings of your Olympic bar using a Teflon-type lubricant or one specialized for Olympic bar maintenance. This lubricant will prevent the bar needles from clogging.
- On the other hand, you must never dismantle the bearings, as this can damage them and alter their operation if they are incorrectly reassembled.